Powdrix is pre-launch. We have no customers to name and will not borrow logos. This page says who the product is for, what a design partner commits to, and who we deliberately do not target.
Aerospace, medical and dental implant, tooling, energy, defence and industrial-part producers running metal powder-bed fusion, directed energy deposition and polymer SLS, MJF and FDM fleets plus post-processing, and captive AM operations inside larger OEMs.
The criteria we check, in order.
Three to five floors in aerospace, medical implant, defence, energy or service-bureau environments that agree to baseline build-failure, yield, CT and porosity, qualification-cost and engineer-review metrics.
We have no customer quotes to show yet and will not invent any. These are the three roles on an additive floor we build for, and the problems they bring to the first meeting.
What this person is dealing with today
What this person is dealing with today
What this person is dealing with today
Aerospace, medical and dental implants, energy and defence, tooling and industrial, and service bureaus, on metal powder-bed fusion, directed energy deposition and polymer SLS, MJF and FDM. Most floors pick one machine and one wedge, prove the number, then expand.
Qualified part families where one failed build or failed qualification is expensive. Meltrix and Poroscan on one metal PBF printer first, with the AS9100 evidence packet attached.
Porosity and surface faults are patient safety. CT grading against acceptance criteria with a named sign-off, genealogy for every implant.
Serial production under qualification and reshoring pressure. Build-failure prediction and fleet scheduling with Yieldex as the floor scales.
Cost per part decides the business. Parttwin to cut coupon campaigns and ramp scrap, Forgebot to reclaim idle machine time.
Many customers, many part families, one floor. Yieldex scheduling across machines, ovens and inspection, with per-customer genealogy.
Every Powdrix run is an ordered, inspectable sequence. This is run_7c2e4b on PBF-2 · Ti-6Al-4V bracket family, 24-part build. Scenario completes in 10 steps with one approval gate. Twin recipe #14 selected, one lack-of-fusion precursor at layer 1,872 cleared by a bounded power trim, CT triage in 11 minutes, 23 of 24 parts released with full genealogy and one held for review.
Floor Orchestrator · Pulled the job from AM MES: 24 Ti-6Al-4V brackets, 60 µm layers, 3,140 layers, density target 99.7%, geometry tolerance ±0.10 mm, AS9100 evidence packet required. Locked the OEM-approved parameter envelope for PBF-2.
Part Twin · Simulated 40 candidate orientation, support and parameter recipes for thermal field, residual stress and distortion, ranked on predicted density, geometry deviation, takt and energy.
Prep-and-Parameter · Recipe #14 released: 32° orientation, lattice supports on two faces, laser power and speed inside the qualified envelope. Predicted distortion 0.06 mm, predicted density 99.8%.
Recoat-and-Powder · Recoater image checked every layer. Powder lot L-2291 on its third reuse, humidity in window. One short-feed at layer 412 corrected with a dosing increase before the next layer fused.
Melt-and-Layer · Melt-pool, photodiode and thermal streams fused at 120 fps. Lack-of-fusion risk rose to 0.61 on part 17 at layer 1,872 and was cleared by a 3% power trim inside the envelope within four layers.
Thermal-and-Distortion · Interlayer temperature on the tall brackets ran 14 °C above the twin's prediction from layer 2,300. A 1.5 s interlayer dwell held the thermal field inside the predicted band through the top section.
Floor Orchestrator · Melt-and-Layer proposed a hatch-spacing change on part 17 beyond the qualified envelope. Held for the AM process engineer, who declined it and chose to flag part 17 for CT priority instead. Decision logged.
Robot-and-Handling · Plate unloaded by the handling cell on build complete, depowdered, and parts transferred to stress relief. Powder returned to the sieve with lot L-2291 reuse count incremented in genealogy.
Defect-and-Inspect · 24 CT volumes segmented for pores, cracks and lack of fusion in 11 minutes. 23 parts graded accept against the acceptance criteria. Part 17 shows a 180 µm indication at layer 1,870 and is routed to the inspector for disposition.
Quality-and-Conformance · 23 parts released with the full genealogy: recipe, layer tags, melt-pool events, thermal trace, approvals, post-processing cycles and CT result. Part 17 held with a non-conformance opened. Evidence packet assembled for sign-off.
A qualified floor does not go from manual to unattended in one step. Powdrix makes the level explicit, auditable and reversible at any time, and human approval for anything that affects qualification stays mandatory until validation exists. The first release runs shadow mode, then assist mode, then graduated autonomy.
| Level | What the agent does | What the human does | Where it sits in a pilot |
|---|---|---|---|
| L1 · Advisory | Predicts and recommends, with citations; nothing is written | Enters every change manually | Shadow mode on one machine, first weeks of a pilot |
| L2 · Supervised | Proposes a parameter, thermal or inspection move; it executes on approval | Approves each move in the review console | Assist mode once accuracy is measured against CT |
| L3 · Bounded | Writes inside the OEM-approved parameter envelope and per-tag limits | Approves anything that leaves the envelope or affects qualification | Graduated autonomy on low-risk loops, if the floor is satisfied |
| L4 · Unattended | Runs the envelope without prompting | Sets the envelope; reviews the shift record | Planned; only after validation on the part family |
The questions operations directors, process engineers and certification engineers ask in the first meeting.
Only inside the OEM-approved parameter envelope, only on an explicit allow-list with per-tag limits, and only at the autonomy level your floor has set. Level 1 is advisory: Powdrix predicts and recommends and a human enters everything. Design partners start there, in shadow mode. Anything that leaves the envelope or affects qualification always waits for a named approver.
Control returns to the printer's own controller and the standing recipe. Powdrix is a supervisory layer on top of the machine controls, monitoring systems and MES you already run, never a replacement for them, so an outage degrades the floor to its current way of running, not to a stop.
Advisory recommendations start from the twin's physics and the part spec in the first weeks. Defect and build-failure prediction improve as layers, CT results and engineer corrections accumulate per part family. The first models are trained on existing in-situ camera data; synthetic rare-defect scenarios augment them only after validation against real CT.
Only if you choose cloud training. Parameter sets, geometry, defect libraries and process memory are isolated per tenant and never used to train another customer's models. Cross-customer learning is federated and IP-isolated and waits on written data agreements. A fully on-prem deployment is available for sensitive producers.
It is designed not to. Validated parameters never change without the sign-off your quality system requires, model changes go through change control, and every action carries model version, data lineage, approval status and qualification impact in the audit log. Powdrix does not claim AS9100 or ISO 13485 certification; assurance packages are planned for the 6 to 12 month release.
You are, as with any process change, which is why every write is policy-checked, bounded, logged and reversible, and why anything that affects qualification waits for a named approver. The audit log records the request, the reasoning, the limits applied and the human decision.
Tell us the machine, the metric and the baseline you would sign. We will tell you honestly whether the wedge fits.
↑↓ navigate↵ openesc close
